Canon T2i The Great Benefit And Feature SLR Digital Camera
buy canon t2i
Only ten months after hitting the market with the EOS Rebel T1i as the “flagship” of Canon’s entry-level DSLR line, it has given the flag to the newly-introduced Canon EOS Rebel T2i. Aside from a solid real similarity and seemingly identical nine point AF programs, a newer digicam seems to offer you incremental modifications to many zones when compared with it’s older sibling, which remains on Canon’s website as of this writing.
Resolution has jumped to 18 megapixels on the same size APS-C CMOS sensor that gives the Eos T2i a 1.6x crop factor (35mm equivalent). The processor is a Digic 4, same as the T1i, but nominal ISO sensitivity range has gone to 100-6400 (expandable to 12,800) while the older camera was 100-3200 (expandable to 6400 and 12,800). An “improved” HD video function offers manual exposure control and a movie crop function.
A metering system functions an “improved” sixty three area iFCL (intelligent focus, color and luminance) dual-layer indicator and also 3.0-inch LCD monitor has had its resolution increased about 9%. In addition to SD/SDHC memory media, the T2i is also compatible with SDXC. The camera can be had as a body-only and is offered in “kit” form paired with Canon’s EF-S 18-55mm f/3.5-5.6 IS lens. Our review unit was the kit camera and here’s what that lens focal length looks like:
The Canon T2i lens mount is Canon’s EF, which makes both EF and EF-S lenses fully compatible. Canon includes an eyecup, camera strap, USB and AV cables, battery pack and charger, and CD-ROM software with each camera. By adding the T2i to its lineup, Canon boasts entry level offerings at 10, 12, 15 and 18 megapixel resolutions. Come aboard as we set sail with the new Rebel flagship.
Build and Design
The T2i is identical to the T1i, with a similar control layout and slight increases in exterior dimensions and weight. The camera picks up a “quick control” button where the live view/movie shooting button used to reside on the camera back.
The live view button is now located adjacent to the camera’s diopter adjustment knob. Round buttons of the T1i camera back have largely given way to more irregular-shaped control pads and the product badging on the front is changed a bit, but that’s about it. The camera body is a composite and fit and finish are comparable to the competition in its class.
Ergonomics and Controls
The T2i with kit lens is relatively small and lightweight. The deeply sculpted handgrip has a fairly tacky material wrapping around from the right side of the body to the channel between the grip and the lens mount, which gives a secure-feeling hold. The shooting finger in the right hands drops normally with the shutter button and, to my hand at least, the pinky folds in the digicam body and sort of locks the camera into the hand. It felt secure enough for me to produce the following “bird in hand is closer than one in the bush” shot. A lorikeet feeds from a nectar cup in my left hand while I take the shot with my right. And here’s a two-handed shot of another fellow in a nearby shrub.
The addition of a quick control button, which first appeared on the 7D, brings up a screen that displays the shooting mode and its various adjustable settings without having to use internal menus. For example, in aperture priority, you can change lens aperture, ISO, exposure compensation, picture style, white balance, image size, auto lighting optimizer, AF mode, metering method and single or continuous shooting rate. Portrait mode by comparison offers only continuous shooting and image size settings.
Menus and Modes
The T2i’s menus are relatively simple and generally intuitive. According to the capturing mode, you have access to also most or only a part of the menu selection. The custom functions menu (available in P, Av, Tv or M shooting modes) has 12 sub-menus covering exposure, image noise, autofocus and drive settings, and four “operation/other” settings; overall, it’s a complex menu. When I first shot the T2i with flash, it fired when the shutter button was pressed. I checked the camera in several different modes with various settings and then came back to flash, which at this point was firing a pre-flash, then the flash, then holding the shutter open for an extended period. Fortunately, the manual’s troubleshooting guide listed a flash problem that seemed to describe my situation, and setting the flash synch speed to 1/200th of a second in the custom functions menu got the flash back where I wanted. The T2i may be an entry level product, but it still throws a curve if you get some inappropriate setting(s) dialed in by mistake.
Ballistic Balance Charger instructions
|Venom 2-4 Cell AC/DC RC LiPo Dual Battery Balance Charger
The Venom 2-4 AC/DC LiPo Battery Balance charger is a great solution for entry level to intermediate RC Hobby enthusiasts. This model comes equipped with single 3 cell, 4 cell, as well as dual 2 cell charge ports capable of charging two 2S batteries simultaneously. This charger includes many great features including auto detection of current rate and capacity of individual cells, Identifying the c…
|Combo Special: Tenergy TB6-B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply
* NiMH/NiCD 1~15 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) * Li-Fe 1~6 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: …
|HOBBYTIGER 2S 3S LiPo LiFe Battery Balance Charger with Power Supply for RC Hobby Airsoft
With Intelligent MCU control system,323B lithium battery charger supports to charge the 2S and 3S Li-Po and Life battery. Specifications: Input Current: 2500mA/MAX (advise power supply: 12/2A) Repair voltage: 1.50V-3.00V/CELL Three charge current: 0.5A, 1.2A, 2.0A Repair current: 200 mA Balance of current: 200 mA Balance of precision: 10mV Repair bad battery time:1 min Under voltage protection…
|GoolRC SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging
Net Weight: 233g
Input Voltage: DC11-18V
Circuit Power: Max Charge: 60W
Max Dischage: 5W
Charge Current Range: 0.1-6.0A
Discharge Current Range: 0.1-2.0A
LiPo/LiFe/LiIon Cells: 1-6S
NiMH/NiCd Cells: 1-15S
Pb battery Voltage: 2-20V
Package size: 15 * 14 * 5cm / 5.9 * 5.5 * 2in
Package weight: 403g / 14.2oz
|Tenergy 1-4 Cells Li-PO/Li-Fe Balance Airsoft Battery Charger
This NEW versatile charger by Tenergy features an advanced individual charging method and safely charges/balances LiPo, LiFe and LiIon packs, maximizing battery life and performance all in one package. Capable of fully charging LiPO and LiFE batteries in under three hours, this simple balance charger is a much more economical alternative to high end balance chargers, which can cost over 100. T…
|uxcell 4Pcs 14.8V 4S LiPo Battery Balance Charger Cable Lead Wire Connector
Widely used to connector lipo battery, especially for RC helicopter model….
|Keenstone UP100AC Plus Lipo Battery The Minimum size 100W AC/DC Balance Charger for Li-Po Li-Hv Li-Ion Li-Fe NiMH Ni-Cd Pb
Specification Item Name: UP100AC Plus Balance Charger Input voltage: AC 100~240V, DC 11.0-18.0V Charge power: Max.100W Discharge power: Max.10W Charge current: 0.1-10.0A Discharge current: 0.1-5.0A LiIo/LiPo/LiFe/LiHv cell count: 1~6 series NiCd/NiMH battery cell count: 1 – 15cells Pb battery voltage: 2V-20V (1-10cells) Weight: 0.44KG Dimension: 135x95x61mm Features Convenience: The charger i…
Incoming search terms:
- schumacher battery charger e32074